Tezla Audio Subwoofer, 1.5K Series 8 inch Dual 4 ohms, Max 1500 Watts, Rms 750 Watts, 2.5 inch Voice Coil
Tezla Audio Subwoofer, 1.5K Series 8 inch Dual 4 ohms, Max 1500 Watts, Rms 750 Watts, 2.5 inch Voice Coil
Tezla Audio Subwoofer, 1.5K Series 8 inch Dual 4 ohms, Max 1500 Watts, Rms 750 Watts, 2.5 inch Voice Coil

Tezla Audio Subwoofer, 1.5K Series 8 inch Dual 4 ohms, Max 1500 Watts, Rms 750 Watts, 2.5 inch Voice Coil

$355.00 USD
Sale Sold out

Availability: In Stock

share : 

Free worldwide shipping on all orders over $50

  • 30 days easy returns

  • Order yours before 2.30pm for same day dispatch

specifications

Enclosures

Files

Wiring

Single Enclosure

 

Outside Dimensions:

Width: 25.50"

Height: 12"

Depth: 12"

Net Size, after displacements, 1.05 Cubes

  
 

Port Size:

Width: 1.50"

Height: 10.50"

Depth: 31.25"

Tuning frequency based off actual port: 34Hz

  
 

Cut Sheet:

Top & Bottom: 25.50" x 12" (2 Pieces)

Front & Back: 25.50" 10.50" (2 Pieces)

Port Side: 9" x 10.50" (1 Piece) 

Non-Port Side: 10.50" x 10.50" (1 Piece)

Port Wall #1: 22.50" x 10.50" (1 Piece)

Port Wall #2: 6.25" x 10.50" (1 Piece)

  
 

Enclosure Type:

Ported Enclosure Design

Material Thickness: .75"

  

Dual Enclosure

Outside Dimensions:

Width: 30"

Height: 12"

Depth: 18.5"

Net size, after displacements, 2.04 Cubes

Port Size:

Width: 3"

Height: 10.50"

Depth: 34.75"

Tuning frequency based off actual port: 32.5Hz

Cut Sheet:

Top & Bottom: 30" x 18.5" (2 pieces)

Front: 30" x 10.5" (2 pieces)

Port Side: 14" x 10.5" (1 piece)

Non-Port Side: 17" x 10.5" (1 piece)

Port Wall #1: 25.5" x 10.5" (1 piece)

Port Wall #2: 5.5" x 10.5" (1 piece)

Enclosure Type:

Ported Enclosure Design

Material Thickness:.75"

Outside Dimensions:

Width: 25.50"

Height: 12"

Depth: 12"

Net Size, after displacements, 1.05 Cubes

Port Size:

Width: 1.50"

Height: 10.50"

Depth: 31.25"

Tuning frequency based off actual port: 34Hz

Cut Sheet:

Top & Bottom: 25.50" x 12" (2 Pieces)

Front & Back: 25.50" 10.50" (2 Pieces)

Port Side: 9" x 10.50" (1 Piece) 

Non-Port Side: 10.50" x 10.50" (1 Piece)

Port Wall #1: 22.50" x 10.50" (1 Piece)

Port Wall #2: 6.25" x 10.50" (1 Piece)

Enclosure Type:

Ported Enclosure Design

Material Thickness: .75"

Outside Dimensions:

Width: 30"

Height: 12"

Depth: 18.5"

Net size, after displacements, 2.04 Cubes

Port Size:

Width: 3"

Height: 10.50"

Depth: 34.75"

Tuning frequency based off actual port: 32.5Hz

Cut Sheet:

Top & Bottom: 30" x 18.5" (2 pieces)

Front: 30" x 10.5" (2 pieces)

Port Side: 14" x 10.5" (1 piece)

Non-Port Side: 17" x 10.5" (1 piece)

Port Wall #1: 25.5" x 10.5" (1 piece)

Port Wall #2: 5.5" x 10.5" (1 piece)

Enclosure Type:

Ported Enclosure Design

Material Thickness:.75"

Wiring Configuration

 

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

 
 

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).

 

2 OHM DVC CONFIGURATION